As with any other tools and equipment, the specifications of your automotive jacks should suffice the job that you need to do. Before you proceed on lifting any vehicle, it is advised that you get the right 3 Ton Jack Stands for you.
Your automotive floor jack should safely lift the weight of a particular vehicle. Automotive jacks have different ratings starting from two tons to twenty tons. You must note thought hat the capacity of any floor jack should not surpass at least half of the vehicle’s gross weight. For instance, if your car or vehicle weighs 3 tons, then you need an automotive floor jack that has a 2-ton capacity to lift your vehicle. For your own safety, you should use jack stands to support the weight of the vehicle that you want to life.
Avoid using the jack as the sole support of the vehicle. The load should be distributed and this can be done with jack stands. Another set of equipment that you can use with your automotive jacks are wheel chocks. These are placed in front of the wheels that will disable any movement while the vehicle is being raised.
Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember.
The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.
The saddle is the round metal part of the jack that moves upward as you pump the jack up.
Push downward on the jack’s lever to lift the saddle upward so that it contacts the crossmember. Continue pushing downward on the lever to lift the car upward.
Place the jack stand under the jack mounting point.
The jack mounting point is a metallic protrusion beneath each of the car doors.
Raise the jack stand until it contacts the Floor Jack 3T mounting point.